Product Code: 20Q480V48
$105.00
A long-run 10mm COB LED tape designed for continuous, dot-free light over extended distances. Runs on 48V DC for low voltage drop, supports up to 30m max run length, and delivers smooth, high-density output with 480 LEDs per meter. Static CCT, CRI 90, 180° beam, cuttable every 50mm, UL listed, and fully dimmable with compatible 48V drivers.
Discover unique, celebrated designs from Nourdic.
Our products are commercial grade and meet building code.
Accessible for every purchase made via our online store.
If you're not happy, take advantage of our easy returns within 30 days.
LED Strip, 150mm PVC Cable (Red V+, Black V-)
Power Supply/Transformer
The 10mm COB LED Tape Static CCT 480 Long Range is built for big runs where standard 12V or 24V tape starts to fall apart. By stepping up to 48V DC, this strip dramatically reduces voltage drop, letting you push clean, consistent light as far as 30 meters from a single feed depending on layout and driver strategy. That means fewer power injections, fewer breaks in your detail, and a cleaner install overall.
COB construction spreads the phosphor across the strip, and the 480 LEDs per meter density eliminates diode dotting. Even in shallow channels or tight coves, you get a continuous, soft line of light with no hotspots. The 180° beam angle helps fill aluminum profiles evenly and creates smooth washes on surfaces.
Color quality is spec-grade. With CRI 90 and tight color consistency (3-step MacAdam / one-bin), finishes read natural and uniform across the entire run. Static CCT options keep the Kelvin locked in once selected, which is what most architectural layouts want for consistency room to room.
Install flexibility is handled through short cut increments. The tape is cuttable every 50mm, letting you dial in lengths precisely without wasting material. It’s also fully dimmable with compatible constant-voltage 48V drivers and controls.
This strip is a strong fit for long coves, corridors, hotel lobbies, retail perimeters, ceiling reveals, and any linear detail where you want one clean run without multiple feeds or visible breaks.
Key specs and benefits
10mm PCB width for standard slim channels
COB continuous output, no visible dotting
480 LEDs/m high density
48V DC long-range system for reduced voltage drop
Up to 30m max continuous run per feed
180° beam for even channel fill
CRI ≥90 with tight color consistency
Cuttable every 50mm for precise field sizing
Fully dimmable with compatible drivers
UL listed for North American compliance
Optional IP protection versions available (dry to outdoor grades)
5-year warranty and 50,000h rated life
If you’re doing long, uninterrupted light lines and want the finish to look as good at meter 25 as it does at meter 1, this is the strip to use.
